Set up traffic cones

Set up traffic cones

Set up traffic cones : Multi-thousand tips to make your life easier.

Knowing how to set up traffic cones can be a very helpful skill. These cones help direct traffic or provide ample warning to road hazards such as unfixed manholes, a big bump on the road, and the like. Properly placed traffic cones can spell the difference between a peaceful commute and a nasty road accident. If you need to set up these cones, read through the reminders below on how and where to place them. It is not simply a matter of placing these cones on the road – there are several things to consider with each movement.

• Imagining the traffic flow. If you need the cones to redirect traffic from a particular spot, first imagine and, if needed, sketch out the ideal traffic flow you have in mind. Strategize on how you can divert traffic from the obstruction you want drivers to avoid, or picture how redirecting the vehicles can decongest a clogged area. Start mapping out the cones when you have a sound plan in place.
• Knowing the various cone types. Your next step is to know what type of cone should be used on your road. The shorter cones are usually meant for giving notice at a shorter distance, since the cones are smaller. These smaller cones are usually a foot and a half in height. This would be useful for covering small bumps in the road and other minor obstructions that a driver can prepare for quickly. There are also larger types, which are usually a bit more than 2 feet in height. These cones are placed at bigger obstructions such as traffic accidents or road construction. The bigger cones are seen from a longer distance and, hence, give drivers more time to react.
• Spacing the cones properly. The next thing you need to do is know how much space should be allotted per cone. Assuming that you have an ample supply of traffic cones, you should place them tightly enough so that cars cannot pass between them, which is their primary purpose. This sends the correct message to drivers that they should drive around the cones and definitely not through them.
• Putting up cones on speedways. When setting up traffic cones on roads where vehicles travel at higher speeds, such as highways, place the cones as early on the road as possible, with tightly spaced cones until you are able to direct drivers to the proper lane. In this situation, set up the cones early so drivers have plenty of time to react and prepare.
• Testing the cones. If you have time, try driving around the cones in a bigger vehicle such as an SUV. Make sure the traffic redirection is not too tight for other vehicles to fit through.

Make sure your cones are in good condition and can still stand stably on their own on the road. Make sure the color is still discernible and that all cones are stored properly.