Remove motor oil from concrete driveway

Remove motor oil from concrete driveway

Remove motor oil from concrete driveway : Multi-thousand tips to make your life easier.

One common problem you may encounter if you park on a concrete driveway is motor oil spills. Oil leaks are quite common, and they can leave a large stain on your driveway unless you clean up the spill right away. Here are some steps for removing motor oil from your driveway.

• Quick removal. When you see an oil spill, your first reaction should be to remove as much of it as possible as soon as possible. Remember, the longer the oil stays on the surface, the harder it will be to remove the stain later. Always keep some kitty litter in your garage or on your driveway, because kitty litter is one of the most effective ways to remove oil stains. Simply take enough kitty litter to cover the entire affected area, let it absorb the oil overnight, and then scoop it up. You can also use oil-absorbing sheets, which are specially designed for absorbing oil.
• Bag the soaking agents. After you have removed the actual oil from the concrete driveway, place all of the kitty litter or oil pads in the correct waste container. Remember that, unlike biodegradable materials, oil does not decompose naturally. Bag the kitty litter properly and deliver it to a landfill or your local waste treatment facility.
• Pre-treat the spot. Now that the bulk of the oil has been removed, apply some detergent to the stained area. All-purpose household cleaning detergent usually works best for oil spots. Make sure you cover the oil spot with enough detergent to thoroughly cover the black spot on the concrete driveway. If the oil is particularly stubborn, you may need to apply a little bleach using a spray bottle for even application.
• Scrubbing. Let the detergent sit on the stain overnight. Afterwards, use a scrubbing brush to scrub the stain out of the concrete driveway. If the stain is fairly recent, you should be able to remove the motor oil easily. If the stains are very stubborn, however, you may need to reapply bleach and detergent. You can also use hydrocarbon mitigation agents, which are specifically designed to absorb and remove oil stains.
• Rinse. After scrubbing away the oil stains, hose off and rinse the stained area. For very stubborn stains, use hot water to rinse the area, which will soften the oil stains and make them easier to scrub away.

With these steps, you should be able to easily remove motor oil stains from your concrete driveway or garage.