Program a GM or Chevy Transponder Chip Key

Program a GM or Chevy Transponder Chip Key

Program a GM or Chevy Transponder Chip Key : Multi-thousand tips to make your life easier.

Cars are getting smarter today. In order to prevent car thefts, most car models today come with ignition systems that will not start unless you use a transponder chip key. These transponder chip keys are programmed in such a way that the car will not work unless you insert the key with the correct programming. If you need to create a duplicate transponder chip key, here are some steps to follow.

• Find the key. First, search for a blank key that will work for your General Motors or Chevy car. These keys are usually available online. Try online retail shops such as Amazon and eBay. One of the best things about purchasing the key online is that you can buy it at a very low price, as opposed to buying it from the auto dealer, where the bill can reach up to a hundred dollars or more. You can also try local locksmiths, who may have transponder chip keys.
• Get the key cut. Now that you have the chip key, have it cut into the shape of your original key. Naturally, you will need to take the blank key along with the original key to the locksmith, who should be able to cut it for just a couple of dollars. The whole cutting procedure will last just a couple of minutes.
• Insert the original key. Now that you have the cut blank transponder chip key, you can start programming it. To program the key, take the original transponder chip key and insert it into the ignition slot. The dashboard lights will turn on and the security light will start blinking. Make sure that you only turn the key to the run mode, without actually running the car engine itself. Wait for the security light to stop blinking, and then remove the original, programmed transponder chip key.
• Insert the blank key. Now, all you need to do is insert the blank key while the program is still loaded in the car. This way, the program will be copied into your blank transponder chip key when you insert it. Place the key in the ignition slot and turn it so that the car is in run mode. Wait for a couple of seconds, or until the security light has already turned off. At this point, your blank key should have already been programmed. To check whether the programming was successful, try starting the engine using the blank key.

Remember that you can actually get the key programmed from the auto dealer as well. The difference, however, is that getting your key programmed at the dealership will cost you a lot of money. Some dealers will charge up to over $200 for a single programmed transponder chip key. With these steps, however, you should have your own key for just a couple of dollars.