Restore Vintage Motorcycle Stands

Restore Vintage Motorcycle Stands

Restore Vintage Motorcycle Stands : Multi-thousand tips to make your life easier.

Although still associated with the bad-boy image, most motorcycle lovers are simply regular people enjoying a hobby or using their preferred mode of transportation.
If you have a great penchant for motorcycles, whether old or new, a vintage motorcycle stand can make an excellent addition to your collection. With some minor restoration, a vintage motorcycle stand can support your most treasured bike, adding to its overall appeal. Because most vintage stands may look worn out, replacing some parts and cleaning can greatly transform them from looking antique to new.
Follow these steps to get the most out of a vintage motorcycle stand:

• Remove the wooden top part of the motorcycle stand. These are normally secured by two bolts or screws, so removing it should be easy with a socket wrench or screwdriver. Remember to clear away any wood fragments once the top is lifted off. Replacing the wood will be easier without any clutter and debris from the removed top.
• Remove any rubber ends covering the edges of the frame piping. These parts are commonly bonded with glue, so you may want to pry them off with pliers. If they don’t give, try using a flat-head screwdriver. Dispose of these rubber ends, as you will need to replace them with new ones after polishing the frames.
• Remove any rust using a strong metal cleaner. Rust or build-up usually accumulates on the frame of the stand, so it’s necessary to clean this area. Use a wire brush, but be careful not to gouge the metal of the frame. For best results, use industrial-strength metal polish.
• Polish the frames to a shine using a standard metal polish. This will give the motorcycle stand a clean and new look without losing its vintage appeal.
• Replace the rubber ends. The rubber ends removed earlier should be replaced with new ones. Major hardware stores carry a wide variety of these rubber ends. Look for the right size, shape, and quality, and secure them to the ends of the frame piping using epoxy glue. If the edges of the frame piping are left without the protective rubber ends, the metal could cause serious damage to your motorcycle’s surface or any other equipment in your garage. It’s best to keep them covered with rubber ends.
• Re-cover the top part of the motorcycle stand with a piece of new wood. When choosing the right type of wood, consider one that can support the weight of a heavy motorcycle. Another thing to keep in mind is the color of the wood; it should complement the color of the metal. Remember to use new bolts or screws when replacing this piece.

Motorcycle stands are important accessories for keeping your bike stable and safe. They are perfect when your motorcycle is at rest in your garage and when you’re polishing or washing it. A well-restored vintage motorcycle stand makes a great addition to your bike collection.