Replace a Fuel Pump in a Pontiac Bonneville

Replace a Fuel Pump in a Pontiac Bonneville

Replace a Fuel Pump in a Pontiac Bonneville : Multi-thousand tips to make your life easier.

The Pontiac Bonneville is a creation of General Motors and is regarded as one of the heaviest sedans ever built. A giant of a sedan, the Pontiac Bonneville was released in 1957, but only in limited production. However, its apparent market success led the Pontiac Bonneville to remain in production until 2005, almost 50 years of production and manufacturing. That is not bad for a car that was initially released as a limited design.
Through the years of the Pontiac Bonneville's manufacturing lifetime, it has gone through many changes and improvements. It has incorporated modern safety features and engine-optimizing innovations. It even boasts of having fuel pumps in its engine, which also means you have to take care of it. Here are some tips on how to replace a fuel pump in a Pontiac Bonneville.

• Not-so-huge requirements. Replacing a fuel pump in a Pontiac Bonneville does not call for major heavy-duty gear and equipment. For this project, you will need a fuel pump kit and a socket wrench. This is no Herculean task. But if you go about it unprepared, you will be in for a big challenge. So take time to prepare to make the job easy.
• What fuel pump to use? The Pontiac Bonneville is a car that has gone through changes and developments. Together with the changes are the parts. For that reason, you should know what fuel pump you should use. The model and make determine the fuel pump you will have to buy. Pontiac Bonnevilles released from 1958 to 1964 use 389-cubic-inch engines. The 1965 to 1970 types use 455ci engines. Make sure to check for the correct year and make of your car.
• The right way to begin the process. Before you begin replacing your car's fuel pump, make sure that you have a good workspace. Park the car in a garage with ample room for you to maneuver parts in and out. When you are in a good spot, begin by removing the pressure from the fuel system. The fuel tank should be empty, so drain it properly. The socket wrench should be used to remove the negative battery cable. To get closer to the fuel pump, remove the jack and spare tire so they are out of the way, then take out the trunk's lining. Once you have done so, you can now open the fuel sender access panel.
• Get closer to the fuel pump. Now that the fuel pump is at hand, remove the quick-connect fittings as well as the electrical connector. The retaining ring of the fuel sender should also be removed. The O-ring should be discarded as well. Disengage the electrical connection and hoses, then remove the fuel pump. With the old pump out, it is time to install the new fuel pump with the help of grommets and some insulators. The O-rings and strainer should also be replaced with new parts. The entire process will be completed by reinstalling the parts.

The Pontiac Bonneville is a good car to have. Take care of it so you can continue driving it.