Replace a Caliper in a VW Jetta

Replace a Caliper in a VW Jetta

Replace a Caliper in a VW Jetta : Multi-thousand tips to make your life easier.

The very first model of the Volkswagen (VW) Jetta was produced in 1980 by a German automaker. From that year on, many variations of this car emerged, such as the City Jetta, Jetta City, Fox, GLI, Jetta Sagitar, Vento, and Atlantic. The make of the VW Jetta has remained practically the same, except for changes in body design and other interior innovations. Its motor has also improved over time, though basic car parts, such as the caliper, are not easy to find. You may look for a replacement caliper for a VW Jetta at some exclusive auto parts suppliers in the country. The best way to find one without much trouble is through the Internet. The site http://rspauto.com/ provides a wealth of information on where to purchase a caliper for a VW Jetta and other car brands for that matter. When changing the caliper of a VW Jetta, take note of the following tips:

• Assemble the tools and materials needed for the job. To replace a caliper in a VW Jetta, you will need a tire iron, a replacement Jetta caliper, various types of wrenches, a jack, and a bleeder bottle.
• Elevate the VW Jetta to a comfortable level. The clearance must allow you to access the wheel that needs to be worked on. Secure the elevated car with a jack, making sure the jack is firmly placed on the ground. Clear the surrounding area of any items, especially delicate ones, to avoid breakages in case the car accidentally falls. Children should also stay away from the work area.
• Detach the caliper from the bolt. Note, however, that the caliper must be only half-detached from the hydraulic line. Take off the covers on the wheel, such as hubcaps, and disengage the bolts one by one. To make the job easier, wiggle the wheel as you loosen the bolts. Once the wheel is off, adjust the jack so the car will not fall down.
• Reattach the caliper to the hydraulic line. Firmly hold the caliper with both hands and ask an assistant to put the bolts back in place. Use an appropriate wrench to tighten the bolts well. The cable or rod that joins the caliper to the wheel must be threaded manually. Make sure the rod is threaded evenly so the caliper will not be dislodged.
• Take out the air from the brake drum. Use a bleeder bottle to completely remove air from the drum. Another way of draining the air is by stepping on the brakes several times until the brakes become stiff.
• Reinstall the wheel. The wheel bolts must be tightly screwed back in place with the use of a wrench or wheel axle. Lower the height of the jack and slowly put down the car. Test the brakes again by stepping on them a few times to know if the air has been completely drained.

If you know how to change a flat tire, you will know how to replace a caliper in a VW Jetta. It only requires practical knowledge and skill to do the job. Take note also that when cleaning the brake components, avoid using compressed air, as it may contain foreign elements such as asbestos, which may cause the brakes to malfunction.