Make a Motorcycle Seat Pan

Make a Motorcycle Seat Pan

Make a Motorcycle Seat Pan : Multi-thousand tips to make your life easier.

The seat pan is a part of a motorcycle that fits the contour of the buttocks. The pan is shaped in a certain way to provide a comfortable riding experience. You can make your own motorcycle seat pan, but doing so requires some experience in shaping metals, which can be quite difficult. This can save you some money. Follow the instructions provided below to make a seat pan for your motorcycle:

• Materials that you need. The materials that you need for the construction are 12-gauge metal, a metal hammer, a metal roller, and a metal curler. Purchase the 12-gauge metal from your local hardware store. If you do not have the other materials at home, you can check with your local auto shop to see if they rent them.
• Determine the shape of your seat pan. The first thing that you have to do is decide on the shape of your seat pan. Get a piece of paper and design the shape that you want. When you are happy with the design, you can transfer it to the 12-gauge metal that you have. Trace the design and add about a half-inch allowance all around the shape. Cut out the shape that you have, including the allowance. The allowance will be bent so that the seat pan can be attached to the seat of your motorcycle.
• Bend the seat pan. Use the metal curler to bend the allowance of the seat pan down. Make sure that you bend only the allowance. Check that the seat pan is symmetrical on both sides. Afterward, remove the rough edges from the ends of the metal by grinding.
• Hammer down the seat pan. Use the metal hammer to hammer the center of the seat pan to create some grooves. This is important so that the seat pan will be comfortable to sit on. The idea is to make the seat pan into a bucket shape. Be careful when hammering so that you do not overdo it.
• Roll the seat pan. Once you have finished hammering, you may notice that the grooves are not as smooth as you would like. This is where you must use the metal roller. Use the metal roller to smooth out the grooves in the metal. When you are happy with the shape, buff the metal seat pan until it is smooth.
• Check the seat pan with your motorcycle. After you are done with the seat pan, check that it fits your motorcycle seat well so that it cannot be removed easily. If the seat pan is too loose for your motorcycle seat, you can adjust the size by shaping it to fit more snugly.

Now you know how to make a seat pan for your motorcycle. The next step is to attach the seat pan to your motorcycle. Secure it in place and you are good to go. Test your motorcycle to see if you are comfortable with the shape of the seat pan that you have made.