How to make headlights set on Auto.
- the headlight set you have usually two adjustment screws, the Vertical and Horizontal of the cone of light influence.
- in Most cases, a cross screwdriver, Inner or outer hexagon key.
- if the vehicle is on a straight surface 10m of a bright wall.
- Then you measure from the ground to the center of the headlamp, and transmits the measured value to the wall. The percentage of the angle of inclination is, depending on the vehicle type.
- in Most cases, a value of 1.2% is specified in this case, it would be 12cm.
- The height of 12cm on the wall.
- screws Then adjust with the adjustment of the light cone to the 12cm Mark.
- With Xenon headlamps setting" is a setting only in a specialist workshop.
- shown here setting applies to you only as a Before or Behilfseinstellung.
Headlight set
How to make headlights set on Auto.
- the headlight set you have usually two adjustment screws, the Vertical and Horizontal of the cone of light influence.
- in Most cases, a cross screwdriver, Inner or outer hexagon key.
- if the vehicle is on a straight surface 10m of a bright wall.
- Then you measure from the ground to the center of the headlamp, and transmits the measured value to the wall. The percentage of the angle of inclination is, depending on the vehicle type.
- in Most cases, a value of 1.2% is specified in this case, it would be 12cm.
- The height of 12cm on the wall.
- screws Then adjust with the adjustment of the light cone to the 12cm Mark.
- With Xenon headlamps setting" is a setting only in a specialist workshop.
- shown here setting applies to you only as a Before or Behilfseinstellung.
Headlight set
By Howtodotips
How to make headlights set on Auto.